Tunap Bike Cleaner 750ml

TUNAP SPORTS Bike Cleaner is a ready-to-use 750 ml bike cleaner for thoroughly cleaning frames and bike components. The biodegradable, water-based formula removes dirt, mud, dust, salt, oil residue and tubeless sealant residue. Thanks to its special adhesion technology, the cleaner stays on the treated surface for longer so it can loosen the dirt where it matters. Bike Cleaner is suitable for carbon, paint, rubber and seals, among others. You can use it on road bikes, mountain bikes, gravel bikes, city bikes and e-bikes.

After a wet, dusty or muddy ride, dirt often stays behind on the frame, around the wheels and between various bike components. Once that dirt dries, it usually takes more effort to remove. With Bike Cleaner, you treat the entire bike in a few straightforward steps. First rinse off the coarse dirt, apply the cleaner, let it work in for 4 to 6 minutes and loosen stubborn dirt with a suitable bike brush.

Why choose TUNAP SPORTS Bike Cleaner?

• Keeps working on the surface: the adhesion technology helps prevent the cleaner from immediately running off vertical and sloping surfaces.
• Removes various types of bike dirt: suitable for dirt, mud, dust, salt, oil residue and tubeless sealant residue.
• Suitable for common bike materials: the material-friendly formula can be used on carbon, paint, rubber and seals.
• Also suitable for e-bikes: the non-conductive formula can also be used for cleaning e-bikes, including the motor and battery housing.
• Conscious choice of materials: the formula is biodegradable and water-based, and the bottle is made from 100 per cent recycled plastic.

The benefits at a glance

• Ready-to-use 750 ml bike cleaner
• For frames and various bike components
• Removes mud, dust and dirt
• Helps remove salt and oil residue
• Also removes tubeless sealant residue
• Special adhesion technology for targeted action
• Biologisch afbreekbare formule
• Water-based formula
• Zonder agressieve oplosmiddelen
• Suitable for carbon, paint, rubber and seals
• Non-conductive and suitable for e-bikes
• Ergonomic bottle for targeted application
• Bottle made from 100 per cent recycled plastic

Which bikes is this bike cleaner suitable for?

TUNAP SPORTS Bike Cleaner is suitable for the regular maintenance of various types of bikes. The cleaner is especially practical after rides that have left dirt, dust, mud or salt on the frame and components.

• Road bike: for removing road grime, dust, dried splashes and other dirt after training and longer rides.
• Mountain bike: for a thorough wash after muddy or wet rides on unpaved trails.
• Gravel bike: for removing dust, mud and tubeless sealant residue.
• E-bike: suitable for cleaning the frame, components and the outside of the motor and battery housing.
• City bike: for regular maintenance with daily use, commuting and riding in changing weather conditions.

What dirt does Bike Cleaner remove?

While riding, your bike is exposed to different types of dirt. The nature of the dirt depends on the weather, the surface and the type of ride. Bike Cleaner has been developed to loosen common dirt on the frame and bike components.

• Mud: suitable for dried and wet mud splashes after rides on unpaved roads and trails.
• Dust: removes dust that has collected on the frame and around the components.
• Salt: helps remove salt residue that ends up on the bike during winter rides or on treated roads.
• Oil residue: helps loosen local oil residue on the treated surfaces.
• Tubeless sealant: can be used to remove leftover sealant residue.

Adhesion technology for longer contact time

A thin cleaner can quickly run down a sloping or vertical bike frame. As a result, the product sometimes only stays briefly where the dirt needs to be loosened. The adhesion technology of our bike cleaner helps the cleaner cling to the treated surface for longer. This is particularly practical on frame tubes, forks and other parts where dirt does not only collect on horizontal surfaces. Because the cleaner does not run off immediately, it has the chance to loosen the dirt where it matters during the prescribed soaking time of 4 to 6 minutes.

• Targeted action: the cleaner stays better in place where you apply it.
• Practical on sloping surfaces: suitable for the various shapes and angles of a bike frame.
• Time to loosen dirt: the formula can keep working on the dirty areas during the soaking time.

Suitable for carbon, paint, rubber and seals

A bike is made up of different materials and finishes that are cleaned during the same wash. TUNAP Sports Bike Cleaner is material-friendly and compatible with carbon, paint, rubber and seals.
This means you can use the cleaner for a complete wash without having to choose a different general surface cleaner for each part. Apply the product evenly, observe the soaking time and rinse the bike thoroughly with water after cleaning.

• Carbon: suitable for cleaning carbon bike components and frames.
• Paint: suitable for use on painted bike surfaces.
• Rubber: material-friendly for rubber parts.
• Seals: suitable for areas with seals that are treated during a normal wash.

Bike cleaner for e-bikes

TUNAP SPORTS Bike Cleaner is also intended for cleaning e-bikes. The formula is non-conductive and helps prevent moisture bridges. The outside of the motor and battery housing can also be treated with the bike cleaner.
First rinse off the coarse dirt. Then spray the frame, bike components and the outside of the housings evenly. Let the cleaner work in for 4 to 6 minutes, loosen caked-on dirt with a brush and then rinse the bike thoroughly with water.

Practical for MTB, gravel and tubeless use

When mountain biking and gravel riding, mud and dust often collect in hard-to-reach places. Tubeless sealant can also end up on the frame and other parts during fitting, maintenance or a puncture.
The bike cleaner also removes sealant residue. This makes the cleaner practical for mountain bikers, gravel riders and other cyclists who ride a tubeless system.

• After muddy rides: to loosen mud from the frame and components.
• After dusty rides: for removing dust on and around the frame.
• After tubeless maintenance: for removing leftover sealant residue.

Clean. Lube. Protect.

Bike Cleaner fits the first cleaning step in the TUNAP Sports maintenance routine:

• Clean: rinse off coarse dirt and clean the frame and bike components with TUNAP SPORTS Bike Cleaner.
• Lube: clean and lubricate the chain and other parts that need lubrication with a suitable lubricant.
• Protect: finish the service by treating suitable surfaces with a bike protection product, such as the bike protection spray.

You use Bike Cleaner for general cleaning of the frame and bike components. For specifically oily dirt on the chain, cassette and derailleur, use the dedicated Tunap Sports chain cleaner.

Instructions for use

1. First rinse coarse and loose dirt off the bike with water.
2. Spray the frame and components evenly with TUNAP SPORTS Bike Cleaner.
3. On an e-bike, you can also spray the outside of the motor and battery housing.
4. Let the bike cleaner work in for 4 to 6 minutes.
5. Use a suitable bike brush to loosen stubborn dirt.
6. Work systematically around the bike so you don't skip any heavily soiled areas.
7. Rinse the entire bike thoroughly with water after cleaning.

Practical tips for a thorough bike clean

• Rinse off thick layers of mud and loose dirt before applying the cleaner.
• Apply Bike Cleaner evenly to the areas you want to clean.
• Give the product 4 to 6 minutes to loosen the dirt.
• Use a bike brush for caked-on dirt and hard-to-reach places.
• Work from top to bottom so you don't make already cleaned parts dirty again.
• Pay extra attention to areas where mud and dust easily collect.
• Rinse the bike thoroughly after treatment so that loosened dirt and cleaner are removed.
• After rinsing, check whether any dirt is still visible in places.

When does your bike need a thorough wash?

How often you use Bike Cleaner depends on the type of bike, the surface, the weather and the way you use the bike. A mountain bike after a muddy forest ride often needs a thorough clean sooner than a city bike that is only used in dry weather.

• After a ride that has left visible mud on the frame and components.
• When a layer of dust has collected on the frame.
• After winter rides in which the bike has come into contact with moisture and salt.
• When tubeless sealant residue has ended up on the frame or components.
• For a full service in which you want to clean the entire bike.

Why rinse first and clean afterwards?

By first rinsing off coarse dirt with water, you remove loose mud, sand and other contaminants before applying Bike Cleaner. The bike cleaner can then focus on the dirt that is still stuck to the surface.
After application, the cleaner needs 4 to 6 minutes to loosen the remaining dirt. A suitable bike brush helps with stubborn dirt and in places that are hard to reach with water alone. Finally, rinse the entire bike thoroughly.